top of page

Changing the Clock on a Digital Tachograph

Writer: Christa Dillon
Christa Dillon
Oct 28
4 min read


Twice a year, the clocks change. Unfortunately, your tachograph doesn't necessarily make this quite as straightforward as changing the clock on your phone!


If you've ever climbed into your lorry after the clocks changed and wondered why the tachograph is showing the wrong time, don't panic. Here's what you need to know.


First, Understand UTC and Local Time


Digital tachographs use two different time settings:


  • UTC (Coordinated Universal Time): The standard time used by the tachograph to record driving, breaks, rests and other activities.


  • Local time: The time displayed for your convenience, which can be adjusted to match the time in Ireland or the UK.


The important bit: Changing the local time display does not change the UTC timestamps used for your driving records.


In Ireland and the UK:


  • Winter: Local time is UTC +0 hours.


  • Summer: Local time is UTC +1 hour.


When the clocks go forward in March or back in October, you may need to adjust the local time displayed on your tachograph.


Smart 1 vs Smart 2 – Is There a Difference?


Whether your vehicle has a Smart 1 or Smart 2 tachograph, the basic principle is the same.


Both generations use UTC to record driving and rest activities, and both allow the local time display to be adjusted.


The main differences in changing the clock relate to the manufacturer, model and software version rather than whether the tachograph is Smart 1 or Smart 2.


Some Stoneridge tachographs may display a "New time?" message when the clocks change, allowing you to confirm the suggested adjustment.


Depending on the model and settings, local time adjustments may also be handled automatically.


Changing the Time on a VDO Tachograph


VDO tachographs are commonly fitted to trucks throughout Ireland and the UK.


The exact menu wording varies between models, including older digital units and newer DTCO Smart tachographs.


  1. Make sure the vehicle is stationary and switch on the ignition if necessary.

  2. Press OK/Menu to access the main menu.

  3. Navigate to the entry or settings menu.

  4. Find the option for Local Time.

  5. Adjust the local time offset using the available controls.

  6. Confirm your selection.

  7. Return to the normal display and check that the local time is correct.


On some VDO models, the menu option is shown as Entry → Vehicle → Local Time.


Remember, you are adjusting the local time offset, not the underlying UTC record.


Changing the Time on a Stoneridge Tachograph


Stoneridge SE5000 tachographs are another common type found in HGVs.


Again, the exact procedure depends on the model and software version.


  1. Make sure the vehicle is stationary.

  2. Press OK to enter the menu.

  3. Navigate to Settings.

  4. Select Local Time.

  5. Adjust the local time offset to the correct setting.

  6. Press OK to confirm.

  7. Check the displayed local time before leaving the menu.


Some Stoneridge models allow the local time to be adjusted in 30-minute increments.


If your tachograph displays a "New time?" prompt when the clocks change, check that the suggested time is correct before confirming it.


What Happens When the Clocks Change?


Time of year

Local time setting

Winter (GMT)

UTC +00:00

Summer (IST/BST)

UTC +01:00


For example, during summer, if your tachograph's UTC time is 07:00, the local time in Ireland and the UK is 08:00.


During winter, UTC 07:00 is also 07:00 locally.


The clocks go forward by one hour on the last Sunday in March and back by one hour on the last Sunday in October.


Does Changing the Clock Affect My Driving Hours?


No.


Changing the local time display does not reset your driving hours, breaks, daily rest or weekly rest calculations.


Your tachograph continues recording activities against UTC.


You cannot gain an extra hour of driving by changing the clock, and you don't lose an hour of rest when the clocks go forward.


The tachograph still records the actual elapsed time.


However, remember that some drivers' hours rules refer to fixed calendar periods, such as a week running from Monday 00:00 to Sunday 24:00. These are not changed simply by adjusting your local time display.


What If the UTC Time Is Wrong?


This is different from changing the local time display.


Drivers should not attempt to make large corrections to the tachograph's UTC clock themselves.


Depending on the tachograph model, very small UTC adjustments may be permitted within specified limits.


If the UTC time is significantly incorrect, report it to your transport manager or employer and arrange for an authorised tachograph workshop to inspect it.


Never attempt to manipulate the UTC time to alter driving or rest records.


A Few Useful Tips


  • Check the local time displayed on your tachograph after the clocks change.

  • Don't confuse local time with UTC when reviewing printouts or activity records.

  • If you drive internationally, remember that local time zones can differ between countries.

  • Don't assume every tachograph has the same menu layout.

  • If your tachograph offers an automatic clock-change prompt, check the suggested time before confirming.

  • If you're unsure, consult the instructions for your particular tachograph model.


Finally...


Changing the clock on your tachograph isn't particularly complicated once you understand the difference between UTC and local time.


The main thing to remember is that UTC is used for your legal activity records, while local time is simply there to make life a little easier for the driver.


And if the tachograph seems determined to make something as simple as changing the clock unnecessarily complicated, you're probably not the first driver to think so!


HGV Smart Ireland – Written by a driver, for drivers.


*This guide is for general information. Menu options and procedures may differ between tachograph models and software versions. Always follow the manufacturer's instructions and applicable regulations


Comments


bottom of page